What foods do you associate with Salmonella?
Most likely your answer will be raw meat and eggs, not flour or nuts. Nevertheless, Salmonella is a very resistant bacterium and can survive in all kinds of foods.
Salmonella is a major cause of foodborne disease. Salmonella bacteria are estimated to cause over 90 million diarrhoea-associated diseases worldwide every year.
The most common symptoms of Salmonella infection are diarrhoea, abdominal cramps, and fever within 12 to 72 hours after eating the contaminated product. The illness usually lasts 2 to 7 days, and most people recover without treatment. But for susceptible populations, Salmonella infection can be severe and even lead to death.
Salmonella is a pathogen that is prevalent in the gut of many animals such as poultry, pigs, cattle, and pets, as well as in insects and people. Salmonella can get into soil, water and food from the faeces of animals or people. The bacteria can easily be introduced into and spread throughout food production facilities via raw ingredients, dirty packaging, equipment and workers’ hands and clothing.
Once introduced into a food production environment, Salmonella thrives in moist, warm environments such as drains, floors and processing equipment.
Salmonella is most often associated with meat, eggs, milk, and raw fruits and vegetables. However, ‘low-moisture foods’ such as infant formula, spices, nuts, peanut butter, flour and chocolate can also be contaminated with Salmonella. Historically, low-moisture foods were not considered a food safety hazard because they have low water activity – less water available for microorganisms to grow. Yet Salmonella can survive in a wide range of pH levels, temperatures and water activities. Salmonella is thus able to survive in all kinds of foods and on surfaces for long periods of time, even up to several months.
Prevent Salmonella entering the processing facility
Undertake proper cleaning and disinfection procedures
Cleaning can be divided into wet cleaning (for meat, vegetables and dairy products) and dry cleaning (for low-moisture foods).
In the wet cleaning procedure, detergents and disinfectants can be used.
When performing dry cleaning, you will need to avoid using water, and disinfectants must evaporate quickly. If needed, a controlled wet cleaning with minimal use of water can be performed. Be sure to dry equipment after controlled wet cleaning, as any remaining moisture could increase the risk of microbial growth and cross-contamination.
All cleaning and disinfection procedures should be validated, to make sure they are effective, even in worst-case soiling scenarios.
The effectiveness of validated day-to-day cleaning and disinfection procedures should be monitored/verified by visual inspection, ATP or microbial swabbing as appropriate.
For all cleaning procedures, maintain a cleaning schedule with descriptions of what, where, when, by whom and how to clean.
Implement Salmonella contamination prevention procedures
Choose the correct cleaning methods to avoid spread of contamination.
Avoid using high-pressure hoses. Whenever possible, clean equipment in physically segregated areas and minimise cleaning in open food-production situations. When cleaning floors and other dirty surfaces, avoid splashing and aerosol contamination of product-contact surfaces.
Divide production into zones for raw and processed food handling.
Use site colour-coding plans to separate areas for different levels of hygiene control, e.g. zones for raw and processed foods.
Use dedicated and colour-coded cleaning equipment and food handling tools.
Colour-coded cleaning equipment and food handling tools give you visual assurance that only equipment colour-coded for use in a given zone is used. This makes it easier to avoid Salmonella cross-contamination via equipment and tools between, for example, raw and processed zones.
If you store your cleaning tools on colour-coded wall brackets or shadow boards, it is easier to ensure that the tools remain segregated by colour during storage. Correct storage facilitates allow for faster drying of cleaning tools and reduces the risk for Salmonella cross-contamination among tools
Use equipment of good hygienic design
Choose cleaning equipment and utensils of appropriate hygienic design to facilitate easy cleaning and prevent microbial growth. Hygienic design features include smooth surfaces, one-piece construction, easy dismantling and a lack of crevices and coatings. Read more about the hygienic design of food industry brushware in this whitepaper.
Monitor Salmonella in the environment
Develop a program for routinely sampling your production environments for Salmonella. An environmental monitoring program (EMP) will assess the effectiveness of your overall hygienic practices, monitor the environment for transient pathogens and help mitigate potential harbourage and growth niches.
Be sure to include cleaning equipment in your environmental monitoring program.
Further guidance on the use of colour coding for controlling Salmonella, and on the selection of hygienically designed brushware, can be downloaded here.
One of the great things about working for an organisation like Vikan is that I get to support the food industry and advance food safety through many different avenues. During 2019 I was involved wi...
This blog post focuses on how you avoid the worst potential pitfalls of a new colour-coding system.
Do you know how important the mechanical action applied during cleaning is in removing biofilms? If you don’t already know, you’ll find the answer here.